2 Speaker Boombox
2 Speaker Boombox Support
TDK Life on Record
Not the right product?
« Go Back
2 Speaker Boombox
Frequently Asked Questions
Why doesn't my iPhone/iPod work when connected to the 30-pin connector?
Make sure the cable has been securely inserted into the USB connection on the boombox and the 30-pin connector on your iPhone/iPod. If the screen "Device not supported" appears on the boombox, you may be using an early model Apple device that is not compatible with the USB connection functionality. If that's the case, the product will work just fine by connecting the 3.5mm cable to the headphone jack on the Apple device and the "Line in" on the boombox. Select Aux 1 for playback. If your iPod/iPhone model is in the supported list and you see "No device connected" or "Device not supported", it is possible that the cable you're using has been damaged. You can check by using the USB to 30-pin cable that came with your Apple device. If that works, contact our customer service for a replacement cable.
Why does my 2 Speaker Boombox turn off on it's own?
We've enabled a sleep mode to conserve battery life. If the product is left on with no input signal, the boombox will turn off. To turn the boombox back on, simply turn the left knob all the way counter-clockwise until you hear it click "off". Turn the knob again clockwise, you'll hear the "on" click and the boombox will power back up.
Is there a warranty on this product?
Yes. There is a one-year limited warranty. If any defect in material or manufacture appears within one year after purchase of this product, at Imation’s option, it will be repaired, replaced, or the purchase price will be refunded. This warranty does not apply to normal wear or damage from abnormal use, misuse, abuse, neglect, or accident.
User Guide- English
Firmware Upgrade Instructions
Register your product to receive updates and exclusive benefits.
iPod Audio Systems